Skip to main content

ELEMENTS OF MEASUREMENT SYSTEM

I) PRIMARY SENSING ELEMENT


This is the element that first receives energy from the measured medium and procedures an output depending on some way on the measured quantity (measured). 

The output is some physical variable e.g. displacement or voltage. An instrument always extract some energy from the measured medium. The measured quantity is always disturbed by the act of measurement, which makes a perfect theoretically impossible. Good instruments are designed to minimize this loading effect. 

II) VARIABLE CONVERSION ELEMENT


If may be necessary to convert the output signal of the primary sensing element to another more suitable variable while preserving the information content of the original signal. This element performs this function. 

III) VARIABLE MANIPULATION ELEMENT


An instrument may require that a signal represented by some physical variable be manipulated by some way. 

By manipulation we mean specifically a change in numerical value according to some definite rule but a preservation of the physical nature of the variable. This element performs such a function. 

IV) DATA-TRANSMISSION ELEMENT


When functional elements of an instrument are actually physically separated, it becomes necessary to transmit the data from one to another. This element performs this function. 

V) DATA PRESENTATION ELEMENT


If the information about the measured quantity is to be communicated to a human being for monitoring, control, or analysis purposes, it must be put into a form recognizable by one of the human senses. This element performs this ‘translation’ function. 

VI) DATA STORAGE/PLAYBACK ELEMENT


Some applications require a distinct data storage/playback which can easily recreate the stored data upon command.

Comments

Post a Comment

Popular posts from this blog

ADVANTAGES AND DISADVANTAGES OF CORONA

Corona has many advantages and disadvantages. In the correct design of a high voltage overhead line, a balance should be struck between the advantages and disadvantages. ADVANTAGES (i) Due to corona formation, the air surrounding the conductor becomes conducting and hence virtual diameter of the conductor is increased. The increased diameter reduces the electrostatic stresses between the conductors. (ii) Corona reduces the effects of transients produced by surges. DIS-ADVANTAGES (i) Corona is accompanied by a loss of energy. This affects the transmission efficiency of the line. (ii) Ozone is produced by corona and may cause corrosion of the conductor due to chemical action. (iii) The current drawn by the line due to corona is non-sinusoidal and hence non-sinusoidal voltage drop occurs in the line. This may cause inductive interference with neighboring communication lines.
Read more

ADVANTAGES OF PER UNIT SYSTEM

PER UNIT SYSTEM The per-unit system expressed the voltages, currents, powers, impedances, and other electrical quantities basis by the equation: Quantity per unit (pu) = Actual value/ Base value of quantity ADVANTAGES OF PER UNIT SYSTEM While performing calculations, referring quantities from one side of the transformer to the other side serious errors may be committed. This can be avoided by using per unit system. Voltages, currents and impedances expressed in per unit do not change when they are referred from one side of transformer to the other side. This is a great advantage. Per unit impedances of electrical equipment of similar type usually lie within a narrow range, when the equipment ratings are used as base values. Transformer connections do not affect the per unit values. Manufacturers usually specify the impedances of machines and transformers in per unit or percent of name plate ratings. Transformers can be replaced by their equivalent series impedances. ...
1 comment
Read more

ABSOLUTE AND SECONDARY INSTRUMENTS

The various electrical instruments may, in a very broad sense, be divided into (i) Absolute Instruments (ii) Secondary Instruments. Absolute Instruments are those which give the value of the quantity to be measured, in terms of the constants of the instrument and their deflection only. No previous calibration or comparison is necessary in their case. The example of such an instrument is tangent galvanometer, which gives the value of current, in terms of the tangent of deflection produced by the current, the radius and number of turns of wire used and the horizontal component of earth’s field.  Secondary Instruments  are those, in which the value of electrical quantity to be measured can be determined from the deflection of the instruments, only when they have been pre-calibrated by comparison with an absolute instrument. Without calibration, the deflection of such instruments is meaningless. It is the secondary instruments, which are most generally used in ev...
Post a Comment
Read more