Skip to main content

SELECTING THE RIGHT SIZE OF SOLAR SYSTEM FOR HOME

Three core factors affect the sizing of your system: your electricity usage, space availability on your property, and your budget.

YOUR ELECTRICITY USAGE

Do you want to try to produce 100% of your power or some smaller percentage?

While any excess production from month to month will carry over as a credit on your utility bill (net metering), you will not want to install a system that produces more than 100% of your power as the utility will not reimburse you for excess power produced at the end of the year. You may also not want to size the system too large if you are planning more energy conservation measures for the future.

To determine how much power you use right now, look for the kilowatt-hour (kWh) consumption on your utility bill. Sum the kWh for the past year to get your annual electricity usage.

Space Availability

The amount of unshaded, easy-to-access, space available for mounting panels will limit the size of the system. You can use In My Back Yard (IMBY), an online tool created by the National Renewable Energy Laboratory to estimate the area on your property available for mounting a system. IMBY allows you to draw a system on a map of your property and then estimates the specifications of the array given the size and orientation of your drawing.

PV panels vary in their dimensions. While a vast number of PV panels are undergoing research and development, a limited number are available on the retail market. Each year Home Power publishes evaluations of different panels. Local contractors will have particular brands they install regularly. When talking with them, find out which panels they use, why they like them, if the panels are UL Listed (required for electrical inspection and utility interconnection) and the panel’s warranty length. A standard industry PV panel warranty is 20–25 years, and manufacturers expect the panel will produce 80% of its rated capacity at the end of the warranty period.

YOUR BUDGET

It is a good idea to evaluate your budget and goals before choosing your system. Some questions to consider include: What is my budget for this project? Will I finance or pay for it out of my savings? Keep your budget in mind.

Comments

Post a Comment

Popular posts from this blog

ADVANTAGES AND DISADVANTAGES OF CORONA

Corona has many advantages and disadvantages. In the correct design of a high voltage overhead line, a balance should be struck between the advantages and disadvantages. ADVANTAGES (i) Due to corona formation, the air surrounding the conductor becomes conducting and hence virtual diameter of the conductor is increased. The increased diameter reduces the electrostatic stresses between the conductors. (ii) Corona reduces the effects of transients produced by surges. DIS-ADVANTAGES (i) Corona is accompanied by a loss of energy. This affects the transmission efficiency of the line. (ii) Ozone is produced by corona and may cause corrosion of the conductor due to chemical action. (iii) The current drawn by the line due to corona is non-sinusoidal and hence non-sinusoidal voltage drop occurs in the line. This may cause inductive interference with neighboring communication lines.
Read more

ADVANTAGES OF PER UNIT SYSTEM

PER UNIT SYSTEM The per-unit system expressed the voltages, currents, powers, impedances, and other electrical quantities basis by the equation: Quantity per unit (pu) = Actual value/ Base value of quantity ADVANTAGES OF PER UNIT SYSTEM While performing calculations, referring quantities from one side of the transformer to the other side serious errors may be committed. This can be avoided by using per unit system. Voltages, currents and impedances expressed in per unit do not change when they are referred from one side of transformer to the other side. This is a great advantage. Per unit impedances of electrical equipment of similar type usually lie within a narrow range, when the equipment ratings are used as base values. Transformer connections do not affect the per unit values. Manufacturers usually specify the impedances of machines and transformers in per unit or percent of name plate ratings. Transformers can be replaced by their equivalent series impedances. ...
1 comment
Read more

ABSOLUTE AND SECONDARY INSTRUMENTS

The various electrical instruments may, in a very broad sense, be divided into (i) Absolute Instruments (ii) Secondary Instruments. Absolute Instruments are those which give the value of the quantity to be measured, in terms of the constants of the instrument and their deflection only. No previous calibration or comparison is necessary in their case. The example of such an instrument is tangent galvanometer, which gives the value of current, in terms of the tangent of deflection produced by the current, the radius and number of turns of wire used and the horizontal component of earth’s field.  Secondary Instruments  are those, in which the value of electrical quantity to be measured can be determined from the deflection of the instruments, only when they have been pre-calibrated by comparison with an absolute instrument. Without calibration, the deflection of such instruments is meaningless. It is the secondary instruments, which are most generally used in ev...
Post a Comment
Read more