Skip to main content

MAINTENANCE RESALE AND RECYCLING OF SOLAR SYSTEM

REGULAR MAINTENANCE:

There is very little maintenance required on a PV system with no moving parts. Some system owners wash their panels, but in the Northwest, our climate tends to take care of this chore. You may want to brush off the panels if they tend to collect leaves, but other than that, your system should operate as designed with no intervention. You can also keep track of your production by reading your production meter or checking the inverter display.

RESALE VALUE:


The affect of a solar system on the appraised value of your home can be hard to predict, but according to a study by ICF Consulting, every $1,000 reduction in annual energy bills increases a home’s resale value by $10,000 to $25,000. However, homes are generally valued in comparison to similarly sized and aged homes around them, and if there aren't many solar homes in your neighborhood, the appraiser may not have a bar to measure against. The market for solar homes continues to grow as energy costs increase along with an increased interest in sustainable building.

RECYCLING PV PANELS:
While it will be another 10 years until the first large number of photovoltaic panels reach the end of their life, the manufacturing members of the European association, PV CYCLE, have committed to setting up a voluntary collection and recycling scheme for end-of-life modules. They are committed to collecting a minimum of 65% of PV modules installed in Europe since 1990, and to recycling 85% of waste. Europe is leading the way and since many manufactures involved in PV CYCLE do business also in the U.S., there’s potential for a similar initiative here in North America.

Comments

Popular posts from this blog

ADVANTAGES AND DISADVANTAGES OF CORONA

Corona has many advantages and disadvantages. In the correct design of a high voltage overhead line, a balance should be struck between the advantages and disadvantages. ADVANTAGES (i) Due to corona formation, the air surrounding the conductor becomes conducting and hence virtual diameter of the conductor is increased. The increased diameter reduces the electrostatic stresses between the conductors. (ii) Corona reduces the effects of transients produced by surges. DIS-ADVANTAGES (i) Corona is accompanied by a loss of energy. This affects the transmission efficiency of the line. (ii) Ozone is produced by corona and may cause corrosion of the conductor due to chemical action. (iii) The current drawn by the line due to corona is non-sinusoidal and hence non-sinusoidal voltage drop occurs in the line. This may cause inductive interference with neighboring communication lines.

ADVANTAGES OF PER UNIT SYSTEM

PER UNIT SYSTEM The per-unit system expressed the voltages, currents, powers, impedances, and other electrical quantities basis by the equation: Quantity per unit (pu) = Actual value/ Base value of quantity ADVANTAGES OF PER UNIT SYSTEM While performing calculations, referring quantities from one side of the transformer to the other side serious errors may be committed. This can be avoided by using per unit system. Voltages, currents and impedances expressed in per unit do not change when they are referred from one side of transformer to the other side. This is a great advantage. Per unit impedances of electrical equipment of similar type usually lie within a narrow range, when the equipment ratings are used as base values. Transformer connections do not affect the per unit values. Manufacturers usually specify the impedances of machines and transformers in per unit or percent of name plate ratings. Transformers can be replaced by their equivalent series impedances. ...

ABSOLUTE AND SECONDARY INSTRUMENTS

The various electrical instruments may, in a very broad sense, be divided into (i) Absolute Instruments (ii) Secondary Instruments. Absolute Instruments are those which give the value of the quantity to be measured, in terms of the constants of the instrument and their deflection only. No previous calibration or comparison is necessary in their case. The example of such an instrument is tangent galvanometer, which gives the value of current, in terms of the tangent of deflection produced by the current, the radius and number of turns of wire used and the horizontal component of earth’s field.  Secondary Instruments  are those, in which the value of electrical quantity to be measured can be determined from the deflection of the instruments, only when they have been pre-calibrated by comparison with an absolute instrument. Without calibration, the deflection of such instruments is meaningless. It is the secondary instruments, which are most generally used in ev...