Author name: Engr. Aneel Kumar

Hydroelectric power generation involves the storage of a hydraulic fluid, water, conversion of the hydraulic (potential) energy of the fluid into mechanical (kinetic) energy in a hydraulic turbine, and conversion of the mechanical energy to electrical energy in an electric generator. The first hydroelectric power plants came into service in the 1880s and now comprise […]

Successfully practice electrical engineering to serve state and regional industries, government agencies, or national and international industries. Work professionally in one or more of the following areas: analog electronics, digital electronics, communication systems, signal processing, control systems, and computer-based systems. Achieve personal and professional success with awareness and commitment to their ethical and social responsibilities,

A current-carrying coil produces a magnetic field that links its own turns. If the current in the coil changes the amount of magnetic flux linking the coil changes and, by Faraday’s law, an emf is produced in the coil. This emf is called a self-induced emf. Let the coil have N turns. Assume that the

Suppose we hook up an AC generator to a solenoid so that the wire in the solenoid carries AC. Call this solenoid the primary coil. Next place a second solenoid connected to an AC voltmeter near the primary coil so that it is coaxial with the primary coil. Call this second solenoid the secondary coil.

Since the equivalent circuit contains two winding resistances and a core-loss resistance then power is lost as heating energy inside the transformer. Hence the conversion of power through the transformer cannot be 100%, a small loss of efficiency occurs. This is usually less than about 2% for power transformers. Assume all resistances and reactances are

A single-phase power system transformer consists basically of two windings wound onto an iron core. The iron core concentrates the flux and restricts it to a defined path. It also creates the maximum possible amount of flux for a given excitation. In order to maximize the mutual coupling the two windings are wound concentrically on

When the maximum kW rating of an induction motor is reached for direct-on-line starting, it becomes necessary to introduce an alternative method of starting the motor. There are several methods used in the oil industry. The object is to reduce the starting current drawn from the supply during all or part of the run-up period.

There are two important time periods that are critical in the application of induction motors. One is the allowable run-up or starting time and the other is the maximum stalling time. The run-up time is determined by the static torque versus speed characteristic, and the moment of inertia of the load. High inertia loads can

Induction motors have two main components, the stator and the rotor. The stator carries a three-phase winding that receives power from the supply. The rotor carries a winding that is in the form of a set of single-bar conductors placed in slots just below the surface of the rotor. The slots have a narrow opening

Main Exciter The exciter (sometimes called the main exciter) is a synchronous generator that has its stator and rotor windings inverted. Its field winding is fixed in the stator, and the rotor carries the armature or AC . In addition the rotor carries the semiconductor bridge rectifier that converts the armature voltages to a two-wire