Skip to main content

Project Support Officer - K-Electric

About the job

Our employees are our company's greatest asset - they are our real competitive advantage. We possesse immense power of innovation, immagination and a desire to attract and retain the best; provide them with encouragement, stimulus, and make them feel that they are an integral part of the company's mission.


Purpose


This position provides support to the Technical team includes:


  • Maintain Data Base Management (Technical)
  • Maintain attendance on TIS
  • Coordination with GSMPO to collect Tripping / APM form data


Database Management


  • To maintain and update 11kV master feeder database.
  • To maintain and update protection relays replacement data (HV OCEF, LV OCEF, Distance Relays, Differential Relays, 11kV feeders OCEF)
  • To update tele-protection status of 220/132/66kV Transmission lines across KE network.
  • To provide support in preparation of Health Index of 220/132/66 kV Auto/Power Transformers across KE Network to evaluate their health.
  • To develop and maintain database of Transformers and Transmission lines tripping for fault categorization
  • Prepare Imprest for general expense
  • To perform role of fleet coordinator and prepare HVA attendance for Department’s vehicle
  • To prepare Stationary Requirement and maintain its Inventory.


Coordination With GSMPO To Collect Tripping/APM Forms Data


  • To review APM forms and performas related to signatures and missing info. Along with this, to trace out the activities performed in APM and develop a report to share with line manager
  • To submit report on planned v/s executed APM shutdowns to higher ups
  • To compile and gather all APM forms along with supportive grid equipment performas with respect to all GSMP Regions.
  • To maintain and update the recommendations pertaining to GSMP Regions against each RCA. Moreover, fill up the compliance received. Later, to share with line manager.


Main Attendance On TIS


  • To Post Attendance, verify Tickets and close it on Decibel.


KE provides equal employment opportunity (EEO) to all persons regardless of age, color, origin, physical or mental disability, race, religion, creed, gender, marital status, status with regard to public assistance or any other characteristic protected by federal, state or local laws.

Click the below link to apply 




Comments

Post a Comment

Popular posts from this blog

ADVANTAGES AND DISADVANTAGES OF CORONA

Corona has many advantages and disadvantages. In the correct design of a high voltage overhead line, a balance should be struck between the advantages and disadvantages. ADVANTAGES (i) Due to corona formation, the air surrounding the conductor becomes conducting and hence virtual diameter of the conductor is increased. The increased diameter reduces the electrostatic stresses between the conductors. (ii) Corona reduces the effects of transients produced by surges. DIS-ADVANTAGES (i) Corona is accompanied by a loss of energy. This affects the transmission efficiency of the line. (ii) Ozone is produced by corona and may cause corrosion of the conductor due to chemical action. (iii) The current drawn by the line due to corona is non-sinusoidal and hence non-sinusoidal voltage drop occurs in the line. This may cause inductive interference with neighboring communication lines.
Read more

ADVANTAGES OF PER UNIT SYSTEM

PER UNIT SYSTEM The per-unit system expressed the voltages, currents, powers, impedances, and other electrical quantities basis by the equation: Quantity per unit (pu) = Actual value/ Base value of quantity ADVANTAGES OF PER UNIT SYSTEM While performing calculations, referring quantities from one side of the transformer to the other side serious errors may be committed. This can be avoided by using per unit system. Voltages, currents and impedances expressed in per unit do not change when they are referred from one side of transformer to the other side. This is a great advantage. Per unit impedances of electrical equipment of similar type usually lie within a narrow range, when the equipment ratings are used as base values. Transformer connections do not affect the per unit values. Manufacturers usually specify the impedances of machines and transformers in per unit or percent of name plate ratings. Transformers can be replaced by their equivalent series impedances. ...
1 comment
Read more

ABSOLUTE AND SECONDARY INSTRUMENTS

The various electrical instruments may, in a very broad sense, be divided into (i) Absolute Instruments (ii) Secondary Instruments. Absolute Instruments are those which give the value of the quantity to be measured, in terms of the constants of the instrument and their deflection only. No previous calibration or comparison is necessary in their case. The example of such an instrument is tangent galvanometer, which gives the value of current, in terms of the tangent of deflection produced by the current, the radius and number of turns of wire used and the horizontal component of earth’s field.  Secondary Instruments  are those, in which the value of electrical quantity to be measured can be determined from the deflection of the instruments, only when they have been pre-calibrated by comparison with an absolute instrument. Without calibration, the deflection of such instruments is meaningless. It is the secondary instruments, which are most generally used in ev...
Post a Comment
Read more